Four-Stroke Bike Additive contains cleaning and dispersant additives and is specially formulated for four-stroke motorbike engines (aspirated and injection)
Applications: Protects the fuel system from corrosion • Normalises petrol consumption and exhaust values • Reduces knocking tendency in the engine • Breaks down residues in valves and combustion chamber • Cleans the carburettor and injectors • Increases economy, operational reliability and performance •Tested for catalyticconverter compatibility,environmentallyfriendly.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1516 | 50 ml | 50X6=300 |
Two wheeler/Bike Oil Additive is a colloidal, MoS solid- lubricant. no deposits, absolutely compatible with all filter systems. reduces running-in and running wear .reduces oil and fuel consumption. increases engine smoothness, reliability and economy. can be used with wet clutches tested for catalytic converter compatibility. compatible with fine filters
Applications: Added to engine oil for four-stroke motorbike engines and two-stroke engines with separate lubrication. Can be used with wet multi-disc clutches. For two-stroke engines with mixture lubrication,Two Wheeler Oil Additive is added to the petrol-oil mixture.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1517 | 50 ml. | 50X6=300 |
Engine Flush is a speciallyformulated combination of additives and carrierfluid.
Applications: One 50 ml can is sufficient for up to 1-2 liters of oil. Add Racing Engine Flush to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approximately 10 minutes.Then change the oil and the filter.Two Wheeler Engine Flush is compatible with all commercially available motor oils. Suitable for use on motorbikes with wet clutches.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1518 | 50 ml. | 50X6=300 |
Inline petrol intake cleaner is a ready-to- use highly effective combination of additives for cleaning all petrol injection systems such as K, KE, LJ etronic and similar systems.The product has been developed and formulated for use in Jet-Clean units.
Applications: Suitable for all petrol injection systems. For eliminating difficulties with starting, irregular idling, poor carbonate response, performance losses, lean surging and high pollution values in the exhaust caused by contaminated injection systems place automatically.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1528 | 100 ml. | 24 |
| 1522 | 5 Litre. | 4 |
High-quality thermos table, extremely adherent, throw-proof lubricant compound. After the solvent has evaporated, the product leaves an extremely adherent, soft film of grease. Also suitable for 0-ring chains.
Applications: :Initial and maintenance lubrication of power-transmission chains. Especially suitable for dusty, dirty and corrosive environments. Due to extremely good adherence, especially suitable for high-load,fast-running chains.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1613 | 500 ml. | 12 / 24 |
| 1638 | 150 ml. | 24 |
| 1625 | 100 ml. | 24 |
Chain Cleaning Spray is a special cleaning fluid which has been developed for removing stubborn dirt such as grease, oil and fuel residues or other serious contaminants from bodywork without damaging any other parts of two wheelers. Chain Cleaning spray has outstanding wetting and penetration properties and if used according to the instructions does not attack glass, rubber, paint, chromium or aluminum. Chain Cleaning spray is thoroughly biodegradable.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1614 | 500 ml. | 12/24 |
| 1641 | 150 ml. | 24 |
| 1626 | 100 ml. | 24 |
Due to its special composition, Paint Protection Teflon, freshens up and preserves the paint surface in a single process. The waxes silicones and polishing pigments in Paint Protection Teflon guarantee the optimum cleaning of coloured and metallic paintwork as well as providing the optimum sheen with lasting effect. Specially developed to restore coloured and metallic paint in a condition from new to slightly matt. The original gloss and appearance is easily restored to paintwork.
Applications:First thoroughly clean the surface to be polished and dry them carefully. Shake Paint Protection Teflon vigorously before use and pour onto a soft rag polishing cloth or sponge. Apply thinly and evenly to the paint surface using circular movements and sight pressure. Only treat one section at a time. Allow Paint Protection Teflon spray to dry until it forms a matt coat. Remove this and polish using a clean, dry cloth. Do not use under direct heat or on worm paint surface. Regular application gives the optimum results.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1632 | 550 ml. | 12/24 |
| 1635 | 150 ml | 24 |
| 1636 | 100 ml | 24 |
Silencer coating is a heat resistant (up to 600°C) corrosion protective coating for metals, based on a special combination of pure Zinc and aluminium and modern resins. It builds up a very heat resistant film that has good adhesion and anti-corrosion properties. It builds up a very heat resistant film that has good adhesion and anti-corrosion properties and gives many things, such as exhaustion pipes, grills and stoves a new look.The spray can be used on many metals, such as Iron, steel, galvanized steel, white iron and cast iron, copper, brass etc.
Applications: It can be used as a primer under a (heat resistant) topcoat or as a one can system (2 layer primer/topcoat) Directions before use: Free surface of rust and dirt; let it dry. Cover the parts which should not to painted.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1633 | 500 ml. | 12/24 |
Corrosions protection agent that forms a toughened, sealed, protective film when dry. The bituminous coating material has good anti-droning action and high abrasion resistance. High amount of solids content. Cannot be painted over.
Applications: For covering spray paint mist in wheel arches and for repairing or complementing existing coatings on vehicle underbodies.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1634 | 650 ml. | 12/24 |
Cleans, polishes and protects. For radiant gloss. Outstanding protection against harmful environmental influences and car wash plants. Evens out small hairline scratches and restores the finish gloss. Provides the paint with deep gloss. Dull paints are easily restored to their original appearance. Its creamy consistence means sparing use.
Applications: Using a applicator Sponge apply a thin even film to the painted surfaces of your Two Wheeler. Allow to dry to a complete haze. Buff to a high gloss using a clean micro-fiber cloth.This wax is safe to use on all clear coatfinishes and may be used by hand.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1732 | 50 ml.x3/1 Pack | 24 |
Multi Purpose Polish Treatment is used universally for cleaning, preserving, care and protection. Multi purpose polish can be used for motor vehicles and hobbies and in the household and garden. This high concentration treatment preparation gives a deep, matt-silk sheen to even badly weathered plastic surfaces. Multi Purpose Polish Treatment repels dirt, dust and water and provides long-term protection.
Applications:Due to its wide application, Multi Purpose Polish Treatment can be used for rubber, plastics, leather, vinyl roofs, sealed wooden surface and painted areas on vehicles as well as in the household and in the garden. For internal and external use.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1746 | 150 ml. | 28 |
Addlub Tyre Puncture Sealant is water soluble tyre sealant that when professionally installed will permanently protect tyres against punctures and air loss. Additional benefits include extending the life of tyres and improving fuel efficiency. Once installed in a tyre, Addlub Tyre Puncture Sealant remains for the legal life ofthe tyre as recommended by the manufacturer.
Applications : The sealant contains millions of microscopic fibres, cooling agents, natural rubber particles, special adhesives and rust and corrosion inhibitors. All of the chemical components are ones used are totally non-toxic and biodegradable. When a tyre is running at its correct pressure it creates less rolling resistance. Less rolling resistance means less drag and pressure on the engine, resulting in
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1816 | 500 ml. | 24 |
