Antifreeze Fuel Additive is a state-of-the-art, ash-free fuel additive for improving combustion and acceleration in partial load range. Compatible with all gasoline and additive qualities. Speed Up considerably improves vehicle acceleration upto -40° temperature.
Applications: Used as an additive in the fuel of all 2-stroke and 4 stroke gasoline engines, especially for motor vehicle engines. Also can be used in two-wheeled vehicles. For the improvement of vehicle acceleration and smooth operation. One 300 ml can is sufficient for max. 70 liters of fuel. Mix the contents of the can with the fuel. Mixing takes place automatically.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1529 | 300 ml. | 16 |
Antifreeze Engine Flush is a specially formulated combination of additives and carrier fluid. In combination with the carrier fluid, the highly effective detergent and dispersant additives dissolve sludge and lacquer formers. All types of oil- soluble and oil insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics upto -400 temperature.
Applications: Cleaning and flushing out the oil circuits of gasoline and diesel engines. The use of Engine Flush is dependent on the degree of contamination of the oil circuit. Not suitable for use on motorbikes with wet clutches. One 300 ml can is sufficient for up to 6 liters of oil. Add Engine Flush to the motor oil at running temp. before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Engine Flush is compatible with all commercially available motor oils.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1530 | 300 ml. | 20 |
Oil Additive is a multi functional high-performance additive for reducing friction and wear and stabilizing viscosity. It protects engine oil against viscosity loss even under the harshest conditions and protects the engine against wear. Oil Additive is based on the latest additive technology and is compatible with all synthetic and mineral engine oils upto -40° temperature.
Applications: For all gasoline and diesel engines in new and used cars.Can contents (300 ml) is sufficient for maximum 5 litre of engine oil. After adding to the engine oil, allow the engine to run warm.The product can be added at anytime.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1531 | 300 ml.. | 20 |
Antifreeze Diesel additive is a new diesel fuel additive for combustion improvement and the faster acceleration associated with it, above all in partial load range. Fully compatible with all conventional diesel and bio-diesel fuels. Diesel Tank additive considerably improves vehicle acceleration upto -40° temperature.
Applications: Add to diesel fuel, especially for vehicle diesel engines as well as suitable for fast vans. For the improvement of vehicle acceleration and smooth operation. One 300 ml can is sufficient for max. 60 liters of diesel fuel. Mix the contents of the can with the diesel fuel. Mixing also takes place automatically.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1532 | 300 ml. | 16 |
