The product is made out of industrial hydro-carbon resin formed by heavy duty emulsion polymerizations process. It is pigmented with anti corrosive pigments for better strength, opacity and water resistance properties. Ideally recommended as protection over steel or concrete structures as water proofing/anticorrosive medium.
Applications: Stir the contents thoroughly well before use. The product is supplied in ready to use consistency. If required 5-10% thinner, turpan oil and petrol only can be added to suit application. After the painting operation is over all the mixing equipments, spray gun, hoses, pipeline and stirrer has to be cleaned with thinner, turpan oil only. If not cleaned properly, the cured coating film may form bits in the coating during next day application.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1801 | 1 Ltr. | 12 |
| 1802 | 5 Ltr. | 4 |
| 1803 | 20 Ltr | 1 |
| 1804 | 200 Ltr | 1 |
Vehicle's body is under continuous attack by corrosive elements such as unnoticed rain water, water enters through doors, glass channels during washing and gets deposited the inside the doors, mudguard and running board etc.These are also the known clear of rust. AddlubTransparent Anti Rust Treatment is crystal clear rust penetration from inside to outside. It is formulated to provide long term protection to car's under bonnet hood under body, mudguard, running board, and dicky inner surface to a corrosive environment.
Applications: The surfaces which have to be treated with undersea! (Transparent) must be thoroughly cleaned beforehand. Rust must be removed. The surfaces must be dry and free of wax, dirt and grease and extensivelyfree of dust.ls to be applied with Part no.2101 Addlub Anti corrosive Spray gun.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1805 | 1 Ltr | 12 |
| 1806 | 5 Ltr | 4 |
| 1807 | 20 Ltr | 1 |
| 1808 | 200 Ltr | 1 |
Solvent-based, permanently elastic and viscous coating compound with optimal covering attributes. After full curing the coating develops abrasion proof corrosion protection with good UPB grey properties and outstanding anti-drone action. Can be painted over wet-in wet, PVC compatible. Coloration by mixing with the original car paint feasible.
Applications: For refurbishing and complementing the factory UPB grey on lower back panels, spoilers, front-ends, sills, etc. For spaying structured finishes.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1809 | 1 Ltr. | 12 |
| 1810 | 5 Ltr. | 4 |
| 1811 | 20 Ltr. | 1 |
| 1812 | 200 Ltr. | 1 |
High gloss water repellent protective paint for preserving the engine compartment.The engine looks new again, prevents corrosion and repels dirt. Protects the engine, ignition leads and system from dampness. Compatible with most rubber and plastic components.
Applications: For all engine compartments and engines in passenger vehicles, commercial vehicles, buses and two-wheeled vehicles.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1813 | 5 Ltr | 4 |
| 1814 | 10 Ltr. . | 2 |
| 1815 | 20 Ltr | 1 |
Addlub Tyre Puncture Sealant is water soluble tyre sealant that when professionally installed will permanently protect tyres against punctures and air loss. Additional benefits include extending the life of tyres and improving fuel efficiency. Once installed in a tyre, Addlub Tyre Puncture Sealant remains for the legal life of the tyre as recommended bythe manufacturer.
The sealant contains millions of microscopic fibres, cooling agents, natural rubber particles, special adhesives and rust and corrosion inhibitors.
Applications: All of the chemical components are ones used are totally non-toxic and biodegradable. When a tyre is running at its correct pressure it creates less rolling resistance. Less rolling resistance means less drag and pressure on the engine, resulting in lower fuel requirement.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1816 | 500 ml | 24 |
Petroleum Jelly Coat is a special grease in form which is compatible with plastics and is formulated for the maintenance and care of motor vehicle electronic systems, particularly the batteryterminals and electrical connectors.
Applications: Used especially for battery terminals, connections and plug connectors in vehicle electronic systems.
| Part No. : | Contents: | Units in Carton: |
|---|---|---|
| 1817 | 500 Grm | 6 |
| 1818 | 1 Kg | 12 |
